TDS - PTO Cover, Dodge G56 Getrag, Corrects Fluid, Sensor, SAE-8, USA made!

Description

PRODUCT REVISED WITH LARGER FILL HOLE
Are you tired of guessing the fluid level of your Dodge G56 transmission?
This custom cover is designed to correct the fluid level on a Dodge G56 6 speed standard transmission.
Fill to the bottom of the upper plug on the cover. This represents the correct fluid level for this transmission.
Factory plug represents 6.5 qts, but you need 8 qts of fluid to cover the internal bearings.
This item uses M10 x 1.5 x 25 Socket Head Cap Screws (not 3/8)
About the cover
This billet cover is made by Trusted Design Services of Bandera County
, TX.
Made from solid 6061-T6 aluminum barstock.
Bolt pattern complies with SAE J704 of Dec '92 and uses M10 bolts.
It is .850" thick and milled on every side to ensure perfect fit and function.
Increases the fluid level PLUS 6 ounces due to the recess in the cover.
Designed to raise the fluid level in the gearbox to ensure proper lubrication.
When checking the lube level, set level at bottom of the fill plug hole.
Now, easier to service with larger fill hole.
AND....
The 1/8" NPT port is for adding a temperature sensor.
Benefits:
Sets fluid to proper level
Helps keep transmission cooler
Low profile for clearance with exhaust or front driveshaft
Less costly than other units
Please check for clearance in your application before purchasing.
Also, see shift pattern pic to determine which transmission you have.
The following items are included in the kit:
1ea Cover Plate
1ea -8 O-ring magnetic fill plug
6ea M10 zinc plated alloy socket head cap screws
6ea thin SS washers (for under the head of the bolts)
1/8" NPT magnetic plug
Gasket not included.
See my ebay store for the gasket, free shipping if included with this item.
http://stores.ebay.com/tdsaluminumproducts/
Free shipping US48
Taxable in Texas