-40%

Stainless Steel Spring Clamps, 2 Inch Wide Leaf Spring

$ 12.13

Availability: 394 in stock
  • Brand: Speedway Motors
  • Return shipping will be paid by: Buyer
  • California Prop 65 Warning: True
  • Manufacturer Part Number: 91033202
  • Type: Leaf Spring Clamps
  • Refund will be given as: Money Back
  • Item must be returned within: 60 Days
  • Returns Accepted: Returns Accepted
  • Condition: New

    Description

    Keeps your front springs in alignment, Works with all brands of springs
    Stainless Steel Spring Clamps, 2 Inch Wide Leaf Spring
    Sku # 91033202
    Mfr. Part # 91033202
    Condition
    New
    Brand
    Speedway Motors
    Sold
    Pair
    Details
    Info
    Stainless steel spring clamps to keep your front or rear cross spring in alignment. Works with all brands of leaf springs.
    To determine which spring clamp will fit your application, use a tape measure, ruler or caliper to measure the width of the main spring leaf (not length of leaf or leaf thickness) and order the spring clamps for that width. Some later fat-fendered Ford cars used the 2" wide springs in front.
    Stainless steel
    Hex head - 7/16" Wrench
    1/4"-10 thread pitch
    Under-head bolt length - 2.70" long
    Bolt hole diameter - 1/4"
    For 2" wide leaf spring
    Works with all brands of leaf springs
    WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
    Specs
    Sold in Quantity
    Pair
    Material Type
    Stainless Steel
    Notes
    Bolt length is 2.70". Max spring thickness is 1.16"
    Overall Width
    2.25
    Depth
    1.70
    Inside Length
    1.16
    MFG. Part #
    91033202
    Reviews
    Spring Clip '37 Ford
    Rated
    by Newms on February 12, 2020
    Summary:
    The width and depth of this clip is perfect for a standard spring. However if you add anything between the individual spring leafs (spring liner #910-33037 as an example) the standard 2" clip is neither wide enough or deep enough to be used. I do not know whether a 2-1/4" clip would work with a 2" spring with the liner. I suspect it may be wide enough but not deep enough.
    Yes, I recommend this product.
    Spring
    Rated
    by Apache on February 09, 2020
    Summary:
    These are really nice but if they were a hair bigger they would be perfect. I have a small layer of powder coat and my springs and I had to do some bending and pounding to get them on.
    Pros:
    Very nicely polished bracket and hardware
    Yes, I recommend this product.
    just the part I needed for my 32 springs.
    Rated
    by john on October 28, 2019
    Summary:
    fit well, well made.
    Yes, I recommend this product.
    All The parts i have ordered from speedway has been correct
    Rated
    by Mike on December 17, 2017
    Summary:
    Perfect have bought a lot of parts from speedway ,Parts have always been in stock Never had to wait ,Always got the right parts ,Customer severice has always been there to make sure a got the correct part..
    These are some really nice clamps!
    Rated
    by Twin Stick on February 27, 2017
    Summary:
    Easy to install. Excellent fit and they look great. These clamps are heavy duty and won't rattle like the bent/hammered strap type clamps.
    Pros:
    Easy To Set Up
    Look sharp
    Rugged Construction
    Yes, I recommend this product.
    Related Items / Suggested Parts
    Stainless Steel Spring Clamps, 1-3/4 Inch Wide Leaf Spring
    Stainless Steel Spring Clamps, 2-1/4 Inch Wide Leaf Spring
    Shipping
    Combined Shipping:
    Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
    Freight Shipping:
    Some products are too large for standard ground delivery and must be shipped via truck freight.
    Please contact us via eBay Message for a freight shipping estimate.
    When possible, please provide a business or commercial address for delivery to eliminate additional fees.
    Please ensure the phone number provided is accurate to avoid delays.
    Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
    Tech Support
    We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
    About
    Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
    Return Policy
    We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
    Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
    All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
    Payment
    Accepted Payment Methods - PayPal and major credit cards are accepted.
    Terms - Immediate payment is required on all listings.
    To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
    Guarantee
    Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
    Disclaimer
    Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.