Hyperco 11342 Chevy Composite Leaf Spring, 200 Lb. Rate

Description

Designed to be significantly lighter than steel thanks to its composite construction, Will retain their design arch and provide more side bite off the corner, Allows teams running leaf springs to be consistent night after night, Eliminates the need of constantly measure, monitor and change the spring for loss of arch/sagging, Engineered to be quicker off the corner compared to steel springs
Hyperco 11342 Chevy Composite Leaf Spring, 200 Lb. Rate
Sku # 44411342
Mfr. Part # 11342
Condition
New
Brand
Hyperco
Sold
Each
Details
Notes
U-bolts should never come in contact with the composite portion of the leaf spring. Hyperco recommends a heavy gauge rubber or plastic hose be fitted over the U-bolts to ensure that there is no metal to composite contact.
U-bolts should be tightened evenly to a torque value of 80 to 100 ft. lbs., or until the center mounting plate yields/deflects. The torque value should be checked on a regular basis to ensure adequate and consistent clamping force.
The mounting pad must extend a minimum of ¼" past the steel mounting plate.
Additional protection for the composite leaf can be obtained by wrapping all exposed surfaces with high quality duct tape.
When installing springs it is important to check the alignment. The inner sleeves must not bind inside the spring bushings on both the front and rear mounting brackets.
Info
This Hyperco Composite Leaf Spring is significantly lighter than steel, retain their design arch, and provide more side bite off the corner. The Hyperco CLS is truly a cost effective, high performance alternative to steel. It allows teams running leaf springs to be consistent night after night without having to constantly measure, monitor and change their spring for loss of arch/sagging. The initial cost is a value based on the incredible service life. Leave the steel on the street, hook up with the Hyperco CLS performance advantage.
On average 70% lighter than steel
No sagging or chassis inconsistency
More durable = greater value
Quicker off the corner compared to steel spring
Composite Spring Dimensions (GIF)
Item Details
Front Bolt: 0.562"
Rear Bolt: 0.5"
Arch: 4.5"
Rate: 200#
Specs
Sold in Quantity
Each
Number of Leafs
1
Material Type
Composite
Leaf Spring Eye Type
Berlin Eye
MFG. Part #
11342
Front Eye I.D.
0.56
Rear Eye I.D.
0.5
Position
Rear
Spring Rate
200
Suspension Height Adjustment
Stock Height
Leaf Spring Width
2-1/2 Inch
True Arch
4.5
Length Eye to Eye
54
Related Items / Suggested Parts
Speedway 1970-75 Camaro Leaf Spring Shackle
Speedway 1976-81 Camaro Leaf Spring Shackle
Hyperco 11340 Chevy Composite Leaf Spring, 175 Lb. Rate
Hyperco 11344 Chevy Composite Leaf Spring, 225 Lb. Rate
AFCO 200036 Camaro Roller Bearing Leaf Spring Slider
Speedway Camaro Leaf Spring Slider
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.