-40%
Chevy SBC 350 5.7L HP 447/447 Lift Cam Camshaft L-79 327 OEM #3863151

Chevy SBC 350 5.7L HP 447/447 Lift Cam Camshaft L-79 327 OEM #3863151

$ 46.63

Availability: 48 in stock
  • Condition: New
  • Modified Item: No
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: United States
  • Fitment Type: Direct Replacement
  • Non-Domestic Product: No
  • Returns Accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Brand: OEM
  • Interchange Part Number: MC2110
  • Lifter Type: Hydraulic Flat
  • California Prop 65 Warning: Warning: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle
  • Manufacturer Part Number: MC1713
  • Refund will be given as: Money Back
  • Custom Bundle: No

    Description

    For sale is a BRAND NEW Engine Pro
    MC1713
    Hydraulic Flat Tappet Camshaft!
    Camshaft Specifications:
    Stage
    :     3
    Duration @ .050":
    Intake: 222 Exhaust: 222
    Advertised Duration:
    Intake: 290 Exhaust: 290
    Valve Lift:
    Intake: .447 Exhaust: .447
    Lobe Separation:
    Intake: 110 Exhaust: 118
    Power Range:
    2000-4000
    Idle:
    Fair
    Lifter Part #:
    817 (not included)
    Comment:
    OEM #3863151, 350hp, L-79, 327
    General Stage 3 Camshaft Specifications:
    Idle Quality:
    Fair with some lope
    Torque:
    Mid-Range 2400-3200 RPM
    Fuel Economy:
    FAIR
    Recommendations:
    Towing:
    Not Recommended
    Racing:
    Mild Bracket Racing
    Computer Controlled Vehicles:
    Modified computer chip may be required to compensate for low vacuum
    Transmission:
    STOCK AUTOMATIC OR MANUAL
    Compression Ratio:
    10.3:1 or less check valve to piston clearance
    NOTE: Anytime you install a new camshaft, it should always have new lifters installed as cams and lifters create a wear pattern as they mate together.
    Camshafts and lifters are guaranteed to be straight, on size, and to correct lift, index and duration.  There is no guarantee on camshafts and lifters after engine is started.  Customer has the privilege of checking and inspecting camshafts and lifters at the time of installation.  If camshafts and lifters do not meet your level of satisfaction, DO NOT INSTALL!  Returns only accepted if camshafts and lifters has not been installed.  No guarantee once engine has been run.